Melted system:
Melted through the system, making the raw leather into melted semi-finished leather after the system, making its chemical stability, non-perishable, for further treatment after the order process to prepare.
There are several different leather melted system processes:
Plant material melted Method (extracted from natural plant materials melted system)
Mineral raw materials, melted Method (originally with chloride, it melted as chlorination system of law)
Mix melted Method (plant materials mixed melted salt chlorination system)
Leather gloves:
Leather gloves, the gloves are well known in the oldest one, the first layer of cowhide, goat, pig and sheep leather, these leather gloves is made from the above, and are not easily damaged, long life and fine processing so comfortable to wear leather gloves, grasp objects accurately, another leather glove also has good thermal insulation properties and advantages.
First layer of skin:
The outermost layer of leather, leather skin from part of the leather without any machining and finishing.
The advantages of the first layer of gloves: dexterous operation, comfort, pay close attention to performance accuracy.
Second floor:
The use of leather cut open or remove inner outer layer of the dermis obtained.
Second floor of the glove advantages: wear, suitable for dry heavy manual labor.
Leather types and the advantages it
Leather:
Ngau Tau layer of skin: Tau most layer of skin using protective gloves, mainly from the ribs scraped. Features: soft, smart, comfortable and good resistance to wear, tear and puncture resistance capacity.
Cow split leather: the majority of the production of gloves with the second floor was used for goods transport and thermal purposes. Usually choose the second floor of the cattle back, choose less convex parts of the shoulder, ribs of the second layer of poor quality, it seldom used. Features: costs less than Tau layer of skin, excellent wear resistance.
Mountain sheep:
Single cortex: its normal thickness can not be pulled out the second floor, it has the advantage of lighter than leather. Because it uses the original thickness, so the mechanical resistance suitable for doing a good glove, because the fibers are not cut, it's wear and puncture resistance has been strengthened, if melted through the system, have better access to results. Features: soft, smart, good abrasion resistance, tear resistance, puncture resistance performance. It depends on the wear resistance of the thickness of leather, usually the thickness is 1.1-1.3MM (better mechanical properties) or 0.6-1.0MM (better flexibility and dexterity).
Pigskin:
The first layer of skin and pig second layer of skin: mostly concentrated in Asian countries, because of its poor resistance to mechanical dexterity and melted after the system ineffective, they were used to isolate the effect of gloves made simple. Features: low prices.
Kid:
Single layer of skin: Because of its poor resistance to wear and tear resistance, usually, only for the production of ordinary gloves. Kid's dexterity and its thickness is directly proportional to, the thinner the more wear smart and comfortable. Features: soft, smart.
The resistance of leather and leather gloves, the main purpose
First layer of gloves: small objects moving or operating.
The first layer waterproof gloves oiled: oily parts of installation, handling oily steel, carpentry, outdoor or wet at work.
Second floor of the gloves: sharp objects, cutting, slip resistance welding products, objects and installation, handling.
Heat the second floor of gloves: hot items, stripping and soldering operations.
Coated split leather gloves: heavy objects, sharp objects with the operation, anti-fouling.
Special treatment of leather gloves
Waterproof leather:
With mineral oil or fluorinated resin to prevent water entering treatment, this treatment can improve the mechanical properties of leather to make it more wear-resistant, and increase the glove's comfort (softness), and extension of dexterity (feelings of), and You can extend the service life.
Waterproof gloves feature: better dexterity, in a wet place can remain soft after use, longer life, use comfortable and precise movements.
Waterproof oiled leather: The synthetic mineral oil or fluorinated resin treatment can prevent the entry of water and oil. This treatment can improve the mechanical properties of leather to make it more wear-resistant, and increase the glove's comfort (softness), and extension of dexterity (feelings of), and can prolong life.
Waterproof leather gloves feature: better dexterity, in the oil and moisture can remain soft after use, longer life, precise movements.
Heat-resistant leather: Leather treated to be more heat-resistant, flame when in contact with reduced shrinkage. The leather handle makes contact with the heat source will facilitate the identification of the leather dyed yellow. This treatment can also be used for the first layer of skin.
Polyurethane-coated split leather:
Second layer of skin using waterproof PU coating and grease into the leather and to improve the mechanical properties.
Buffer vibration of the material:
The anti vibration materials, you must know the following information:
The frequency of vibration
Intermittent or continuous vibration, reciprocating and rotary tool tools produced by continuous vibration or air pressure tool to generate continuous vibration.
Leather or textile surface:
Padded structure so that the skin of the hand feel comfortable, GELFOM damping layer consists of two layers of rubber foam to protect GELFOM damping layer, which is a weakening of the ideal structure and absorb vibration.
