Heel nailing procedure appears to be the shoe-making process
The most important process, but often by
In equipment or operational reasons, binding of different specifications with or use different nail, will make the operator act with confusion, inefficiency and even cause heel nailing quality is not stable, with case damage. So the experience is particularly important, and choose the good equipment will get twice the result with half effort.
Bao Wei to POWER LION PL-760AMT computer numerical control automatic nailing device used with machine in Italy imported complete sets of the original accessories, PLC control system, accurate, efficient, can be applied to any male women's footwear, and different height, size heel nail with the homework, is recommended for a nailing machine.
Previously, when in riding, view the nail with the situation very troublesome, is a waste of time. The main reason is in open boot time, meanwhile we should notice the perfect boots, for a lot of time. Especially there is no zipper boots will waste more time. While the PL-760AMT binding with the machine with display and the camera device, dedicated to check boots nail with case. Its operation is very simple, fast. Only need to put the boots to gently set in the camera, the display will clearly show the nail, the inspection process to need 3 seconds only, can save a lot of valuable time, ensure the perfect boots.
In addition, doing sandals when, often for binding and difficult to locate. Is not good, not only with will shift, but also bad heel nail. And rework rate high, low efficiency. The main reason is the lack of positioning device. PL-760AMT nailing device with sandals with machine positioning device, adopts adjustable pneumatic structure, the device can better grasp the nailing position adjustment sandals. Ensure that the packaging effect, so as to enhance the efficiency of.
In the binding with special line, often for the pressing force when confused. Pressure instability, nails hit into, loaded with poor effect; pressure steady, with deformation, loses more. The main reason is the die limited. PL-760AMT loaded with machines with PU cover type U device model. Mainly for special shaped with pressing, and a full range of pressure, ensures that the nail loading effect.
In the binding of code and the size of shoes or boots, often with nail bad or center deviated or nail in the nail end core phenomenon. Not only cause unnecessary waste and loss and in the end, will cause the machine to the nail seat mace loss, but also to affect the efficiency of. The main reason is when the shoe or boot cover on the nail seat, no longer see the nail seat center where, so often nail bad with and in the end of. PL-760AMT loaded with machines with a nail seat center positioning lamp. This light is through the zoom, and the use of cross lines to irradiate the nail seat center, clear, accurate. When the shoe or boot of the nail seat on time, positioning the lamp will irradiation in the heel and sole. Only need to put the bottom center line and a positioning lamp reticle alignment, and normal operation, ensures the nail loading effect.
In the production process, there is a need to nail arranged round teeth nails, four pins, two pins, the size of the with, not only to prepare suitable nail seat and a nail feeding mode, also need to invest in a special packaging four Brad and two screw machine. Such as those commonly used mold or machine did not receive a good management, applied again feel installation very distressed. So not only investment, but also to expend energy to management. PL-760AMT loaded with machines is a combination of round teeth nails, nails, nail four corners as a whole machine, with a dedicated management mold box, convenient for mold, in the operation is also very simple, fast. Different from, different materials can choose different nailing mode, need only in the touch screen with just one click conversion.
When binding the tip with a fine, often with nail splitting phenomenon. This phenomenon is the main reason is the binding selection of nailing patterns related to, even if the choice of a second nail mode, but still has a nail split with phenomenon. The reason is that the machine does not or difficult to control nailing time interval. It caused several iron almost simultaneously binding, so small and cannot bear a few nails all impact pressure. PL-760AMT loaded with machines designed for nail crack tip small fine with the phenomenon to design the control interface, digital control, regulating hammer time interval is convenient, accurate. In order to further ensure the packaging quality, the interface also set encryption protection, only allows operators to control.
In the packaging size of the heel, the replacement of different length and specifications nails are more trouble. The main reason is the release of nails, nail box to dismantle many spare parts, to replace the required nails. It will not only take up a lot of time, but also to the nail box caused adverse effects. PL-760AMT loaded with machines designed packaging nail length, different specifications of the nail box, can be arranged in two different lengths of round teeth nails and two different lengths of the center pin, in the choice of different nails when convenient, but also to enhance the efficiency of.
In the selection of automatic nail feeding mode, one part does not need iron nails still conveying, not only causes the heel damage, still can make nails scattered on the table. The main reason is due to the sliding screw slot on a block by the vibration of the machine, and can not be completely shut down the iron transport caused by. PL-760AMT computer, automatic loaded with machines adopting drawn core type design, the needle core is spring buffer directly into a sliding nail slot, to ensure that the closure of the nail slot no nails down. Its operation is very simple, only needs to enhance the needle core can be rotated, but also ensure the packaging quality and working table clean.
In the production process often occur in loaded with fatigue, a floating nail phenomenon, the main reason is the gas flow and pressure to add enough time caused by, and inside the machine,, joints, valves, pipeline storage, cylinder, the supply air line also has a relationship, so the work efficiency was affected. PL-760AMT mounted with machine pneumatic system standard design, no matter is in the pipeline, fittings, valve, cylinder storage, used standard parts. As long as the supply gas pressure, flow is sufficient, can ensure that won't be lack of power, overcome the phenomenon of floating nail.
In normal maintenance machine maintenance time, either check operation control keys or action control valve are very inconvenient, but also need professional dismantling the machine part device inspection and maintenance. This will not only affect the production schedule, will influence the performance of the machine. PL-760AMT device with a unique self-checking function, it can not only detect the operation control key and the operation control valve is normal, but also can separately detect every movement, and the operation is simple, just on the touch screen conversion self interface, and then gently touch the need to detect the corresponding key can be completed.
In the use of more advanced equipment and machine after a period of time, the same operation, the same maintenance, or find the machine function more and more than before. The main reason for this phenomenon, is not adhered to a reference machine instructions maintenance, once lost is more difficult to maintain. However, PL-760AMT loaded with machines has humanized design, maintenance and can conveniently access parameters of the technical requirements, its operating only on the touch screen to gently open folder, in accordance with the steps to follow, at the same time the steps required for routine maintenance, will make the machine durable.
Visible, PL-760AMT computer numerical control automatic nailing device with machine humanized design, timely to remind the do maintenance, system testing and matters needing attention. All use of operation, control, technical parameters and pictographic picture can be displayed at any time, can be switched freely in English, and have a count timer function, function is very powerful.
